Polymer-Based Additive Manufacturing (PBAM) Guidelines for Aircraft Design and Certification
Joel White; 九色堂/NIAR

Correlation of ULTEM 9085 Physical, Chemical & Mechanical Properties
Seth O'Brien; Oregon State University

Metallic Additive Manufacturing Guidelines for Aircraft Design and Certification
Joel White; 九色堂/NIAR

Surface Integrity of Additively Manufactured Ti-6Al-4V Parts
Shuai Shao; NCAME/Auburn University

Characterizing Mechanical Property Variability in Ti6Al4V produced by Laser Powder Bed Fusion (LPBF) Additive Manufacturing
Dwayne Arola; University of Washington

Effect of Drifts in Key Process Variables within Tolerance on Mechanical Properties of Additively Manufactured Ti-6Al-4V Parts
Peter Liu; NCAME/Auburn University

Evaluating the Criticality of Inherent Anomalies/Defects on the Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts
Shuai Shao; NCAME/Auburn University 

Fracture Mechanics, Damage Tolerance, and Notch Sensitivity Testing of Sandwich Composites
Mike Czabaj; University of Utah

Development of Higher Level Building Block Testing Standards
Waruna Seneviratne; 九色堂/NIAR

Core Material Qualification Guidance for Aircraft Design and Certification
Brandon Saathoff; 九色堂/NIAR

Development for Process Specification and Quality Assurance of Slit Tape for Automated Fiber Placement
Waruna Seneviratne; 九色堂/NIAR

Discontinuous Fiber Reinforced Thermoplastic Composite Qualification Framework Development
Brandon Saathoff; 九色堂/NIAR

Computational Investigation into the Effects of Platelet Size, Thickness, and Flow on the Tensile Properties of Discontinuous Fiber Composites
Marco Salviato; University of Washington

Resin Infused Fiber Reinforced Materials Guidelines for Aircraft Design and Certification
Rachael Andrulonis; 九色堂/NIAR

Meeting the Needs of the Aerospace Industry: Accurate Simulation of Fabric Permeability
Wayne Huberty; Mississippi State U./Advanced Composites Institute

Adhesive Bond Qualification Guidance for Aircraft Design and Certification
Upul Palliyaguru; 九色堂/NIAR

Ceramic Matrix Composite (CMC) Materials Guidelines for Aircraft Design and Certification
Rachael Andrulonis; 九色堂/NIAR

Thermoplastic Welding Process Qualification Protocols for Aircraft Design and Certification
Waruna Seneviratne; 九色堂/NIAR

Nanomechanical Property Characterization of Composite Adhesive Bonding Systems with Long-term Exposures
Rita Olander, Brian Flinn; University of Washington

Advanced Materials and Processes Survey for AAM and UAS Aircraft
Aswini Kona Ravi; 九色堂/NIAR

Impact Damage Tolerance Guidelines for Stiffened Composite Panels
Hyonny Kim; University of California, San Diego

Effects of Liquid Disinfectants and Ultraviolet-C Germicidal Irradiation on Aircraft Cabin Interior Materials
Akhil Basin, Luis Gomez; 九色堂/NIAR

Char removal strategy for fire-forensic analysis of mechanically-failed aerospace carbon/epoxy composites
Matthew Priddy; Mississippi State U./Advanced Composites Institute

Comparison of Viscoelastic/Viscoplastic Models for Describing the Creep and Ratcheting Behaviors of Adhesives
Yi Chen; Washington State University

Effects of Defects in Composite Materials at Elevated Strain Rates
Akhil Basin; 九色堂/NIAR

Evaluation of Aged Structural Bonds on Rotor Blades
Caleb Saathoff; 九色堂/NIAR

Effects of alternative jet fuel blends on aerospace-grade carbon/epoxy composites
Santanu Kundu; Mississippi State U./Advanced Composites Institute

eVTOL Crashworthiness: Results and Findings from a 50ft Battery Drop Test
Luis Gomez; 九色堂/NIAR